RAM® Large Gas Tank Ball Base for Motorcycles
OVERVIEW
The RAM Gas Tank base is a low-profile way to get a unique perspective from your camera or to attach your electronic device where it can be qu...
RAM® ATV/UTV Rail Base with no U-Bolts
OVERVIEW
Designed for a clean installation, the RAM-B-231Z-2NUB accommodates most common tubing sizes on UTVs and ATV's, allowing for the placement of the RA...
RAM Transducer Arm Mount with Male Wedge Base for RAM, Attwood and Fish-On! Wedge Hole Bases
Kayak fishing is all about adaptability. RAM Mount offers the widest selection of kayak fishing accessor...
RAM Transducer Arm Mount with Male Wedge Base for Hobie and Scotty Wedge Hole Bases
This solution enables the quick and effective deployment and retrieval of your transducer, while protecting your ...
RAM Transducer Arm Mount with 6.1cm x 3.3cm Diamond Base
Kayak fishing is all about adaptability. RAM Mount offers the widest selection of kayak fishing accessories to adapt to a wide range of fish...
RAM Transducer Arm Mount with 18" Rigid Aluminium Rod and Open Single Socket: Compatible with all RAM 1" Ball Bases
Kayak fishing is all about adaptability. RAM Mount offers the widest selection of...
RAM 2" x 3" Rectangle Base with 1" Ball
The RAM-B-202-23 contains a 1" diameter rubber ball connected at right angles to a 2" x 3" rectangular base. This mount has pre-drilled holes at each corner ...
Quick Release Adapter with B Size 1" Ball for OtterBox uniVERSE iPad Air 2 and iPad Pro 9.7 Case
Securely mount your iPad Air 2 or iPad Pro 9.7 with its Otterbox uniVERSE case in your vehicle with ...
POD I Universal No-Drill Vehicle Mount with Single 1" Socket Arm
The RAM-B-316-1 consists of the RAM POD I universal No-Drill vehicle base, 18 rigid but flex capable aluminium rod and single 1" ...
POD I Mount with Clamp Base and Diamond Adapter
Aviation mounts have been a part of the RAM product line since the beginning. Quality, lightweight, and versatile products that will enhance any cock...
Pinch-bolt Mount with 1" Ball GoPro Adapter
The RAM-B-272-GOP1 consists of an angled base with 9mm hole, 3.69" double socket arm and custom GoPro adapter. The angled base is often used on motorcycl...
Pinch-bolt Mount with Tough-Ball Male Camera Thread
The RAM-B-272-379 consists of an angled base with 9mm hole, 3.69" double socket arm and Tough-Ball with male camera thread. The angled base is ...
Pinch-bolt Mount with 1" Ball Garmin VIRB Adapter
The RAM-B-272-GA63 consists of an angled base with 9mm hole, 3.69" double socket arm and custom Garmin VIRB adapter. The angled base is often use...
Mount Yoke Clamp 1" Ball, Standard Arm and Round Base
The RAM-B-121-202 is a yoke mount base clamp with a 1" rubber ball, standard length arm and round base with amps hole pattern.
The yoke clamp b...
Mount with Yoke Base, Double Socket Arm and T-Slot Ball
Simply slide the RAM T-Slot attachment piece into the T-Slot interface and twist the ball to tighten. Designed into the mount is a 1" diamete...
Mount with Yoke Base and Standard Double Socket Arm for 1" Ball
Mount with yoke clamp base and standard double socket arm for 1" ball. Designed into the mount is a 1" diameter patented rubber ball ...
Mount with Standard 1" Ball Arm, Round Base with 7" Tablet X-Grip II
The RAM-B-138-UN8 consists of a 2.5" diameter round base with the universal AMPS hole pattern, double socket arm and universal X...
Mount with Short 1" Ball Arm, Diamond & AMPS Bases
OVERVIEW
The RAM-B-140U-A consists of a short double socket arm, a 2" X 1.7" ball plate with the 4 hole AMPS hole pattern, and a diamond ball ...
Mount with Round Base and Long Double Socket Arm for 1" Ball
The RAM-B-103 consists of a 2.5" round base and long double socket arm that will accept the 1" ball range. The round base contains pre-d...
Mount with Round Base & Short Double Socket Arm for 1" Ball
This mount consists of a round base and short double socket arm that will accept the 1" ball range. The round base contains pre-drill...
Mount with Round and Square Plates (AMPS Hole Pattern)
The RAM-B-139 consists of a 2.5" diameter round base with the universal AMPS hole pattern, double socket arm and 2" x 1.7" square base also wi...
Mount with Rail Clamp, Short 1" Ball Arm and Round Bases.
The RAM-B-108-A, powder coated marine grade aluminium mount, consists of a short double socket arm with a 2.5" diameter round base with the...
Mount with Rail Clamp & Strap with Round Base 1" Ball
Rail or Bar base clamp with standard 1" double socket arm and round base with ball. Accommodates rails from 1.0" to a maximum of 2.1" in di...
Mount with Rail Clamp & Strap with Diamond Base 1" Ball
Rail or roll cage clamp base with standard 1" double socket arm and diamond base with ball. Suitable for rails / roll cages between 1" - ...
Mount with Diamond Base & Standard Double Socket Arm for 1" Ball
This mount consists of a diamond base and double socket arm that will accept the 1" ball range. The diamond base features pre-dr...
Mount with Diamond Base & Long Double Socket Arm for 1" Ball
This mount consists of a diamond base and long double socket arm that will accept the 1" ball range. The diamond base features pre-d...
Mount for Lowrance Elite-4 & Mark-4 Series Fishfinders ?Light Use?
The RAM-B-101-LO11 consists of a 2.5" diameter round base with the universal AMPS hole pattern, double socket arm and adapter ...
Motorcycle Mount for Zumo with Standard 1" Ball Arm
The RAM combination handlebar and brake/clutch reservoir mount provides the ultimate flexibility for mounting to your motorcycle. Mount to either...
Motorcycle Mount Base with 1" Ball & No Hardware
Motorcycle handlebar or brake / clutch reservoir base with 1" ball and no mounting hardware.
Material:
Powder Coated Marine Grade Aluminium
Bal...
Medium Tough-Claw with Standard Arm and 1/4"-20 Action Camera Adapter
The RAM-B-404-366 consists of the RAM® Tough-Claw rail clamp base, double socket arm and 1/4"-20 threaded ball adapter for ac...
Marine Electronics Base Plate 1" Ball
The RAM-B-111BU consists 1" diameter rubber ball connected to a flat 6.25" x 2" rectangle base. The base contains different combinations of pre-drilled holes w...
Medium Double Socket Arm, Dual Extension with Ball Adapter for B Size 1" Ball Bases
The RAM-B-201-201U consists of two standard-length double socket arms, connected by a double ball adapter. A sing...
