0.5 ID Rail Base with 1 Ball & two 3/8" Threaded Studs
0.5 ID Rail Base with 1 Ball & two 3/8" Threaded Studs.
Material:
Powder Coated Marine Grade Aluminium
Ball Size:
1" Rubber Ball "...
1" BALL AND TALLON FEMALE BASE
RAM 1" ball adaptor and a Tallon flush mount receiver. The receiver can be factory, or retrofitted, in almost every type of boat, RV or kayak in just minutes.
Mater...
1" Ball Mount with Long Double Socket Arm, 2.5" Round Base & 2" x 1.7" Rectangular AMPS Plate
The RAM-B-139-C is a mount based on a long 1" double socket arm (5.1875" socket centres) with a cir...
1" Ball Mount with Short Double Socket Arm & 2" x 1.7" Rectangular Plates AMPs Hole Pattern
The RAM-B-141, is a powder coated marine grade aluminium mount. It consists of a short double socket ...
1" Ball Mount with Short Socket Arm, Marine Electronics Base & AMPS Round Base
The RAM-B-111-A consists of a short double socket arm, 2.5" diameter round base and 6.25" x 2" rectangle base. The...
1" Ball Mount with Standard Double Socket Arm & 2" x 1.7" Rectangular Plates AMPs Hole Pattern
The RAM-B-141, is a powder coated marine grade aluminium mount. It consists of a double socket arm...
1" Ball with 10-24 Threaded Hole
RAM 1" Ball with an aluminium post threaded with a 10-24 Imperial thread hole.
Material:
Powder Coated Marine Grade Aluminium
Color:
Black Powder Coat
Ball Size:
1"...
1" Ball with 3/8"-16 Threaded Post
The RAM-B-236 consists of a 1" rubber ball and 3/8"-16 threaded post.
Please note this is the 'original' RAM-B-236, just with the addition of the suffix -SEC1 to ...
1" Ball with Female Threaded Hole 5/16" 24TPI
The RAM-B-358 includes a 5/16"-24 female thread connected to a 1" rubber ball.
BALL/SOCKET SIZE
B Size (1")
WEIGHT CAPACITY
2 lbs
MATERIALS
Marine-grad...
1" Diameter Ball with Custom Garmin VIRB Camera Adapter
Action Sports Cameras have revolutionized how we capture and share some of the most exciting moments in our lives. The Garmin VIRB is one o...
2" X 1.7" Adapter Base with 1" Ball for the TomTom Rider 2 & Urban Rider
The RAM-B-347-TOM1 connects to the back of the factory holder that is included with the purchase of the TomTom Rider 2/U...
2" x 2.5" Rectangle Base with 1" Ball
The RAM-B-202-225 contains a 1" diameter rubber ball connected at right angles to a 2" x 2.5" rectangular base. This mount has pre-drilled holes at each corner...
2.5" Round AMPS Base, 1" Ball & Hardware for the Garmin Striker 4 Series
The RAM-B-202-G4 consists of a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drille...
2.5" Round Base with 0 Degree 1/4" NPT Hole
A RAM 2.5" round base, made of cast marine grade aluminium, with a horizontal 1/4" NPT threaded hole. The base has the AMPS hole fix pattern.
2.5" Round Base with 1" Ball with Mounting Hardware for Raymarine® Dragonfly
The RAM-B-202-RYM1 consists of a 1" diameter rubber ball connected to a flat 2.5" diameter base. The base has pre-drill...
B Size 1" Fishfinder Ball Adapter for the Lowrance Hook² Series
Designed for light duty use, this B size (1) ball base kit for the Lowrance Hook² allows users to swap out the factory mounting solu...
B Size 1" Fishfinder Mount for the Lowrance Hook² Series
Designed for light duty fresh water use, this B size (1) aluminium drill-down kit for the Lowrance Hook² allows users to swap out the facto...
Base 1.5" X 2.5" W/ 1" Ball
The RAM-B-202-1525 contains a 1" diameter rubber ball connected at right angles to a 1.5" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the...
Base with 0.25" NPT Threaded Hole 45°
A 2.5" diameter base with a 0.25" NPT threaded hole at a 45deg angle to the flange.
Material:
Powder Coated Marine Grade Aluminium
Ball Size:
1" Rubber Ball "...
Base with 0.25" NPT Threaded Hole 90°
A 2.5" diameter base with a 0.25" NPT threaded hole at a 90deg angle to the flange.
Material:
Powder Coated Marine Grade Aluminium
Ball Size:
1" Rubber Ball "...
Base with Twin 1" Balls and a 0.25" NPT Thread
A base with an 0.25" NPT threaded hole and twin 1" balls.
Material:
Powder Coated Marine Grade Aluminium
Ball Size:
1" Rubber Ball "B" Size
Brake/Clutch Reservoir Mount with Power Plate III Radar Detector Holder
The RAM Magnetic Power Plate III U-Bolt Handlebar Mount is designed to hold radar detectors securely while on the road.
The ...
Brake/Clutch Reservoir U-Bolt Mount for the Garmin 12s, & Streetpilots.
The RAM aluminium 2.5" diameter round plate has an AMPS hole pattern which connects to many different holder types:
GARMI...
Brake/Clutch Reservoir U-Bolt Mount with AMPS Round Base Adapter
Simply attach the RAM-B-174-202 ball base to the brake/clutch handlebar control bracket and the possibilities become endless. Rubber...
Brake/Clutch Reservoir U-Bolt Mount with Diamond Base Adapter
Simply attach the RAM-B-174 ball base to the brake/clutch handlebar control bracket and the possibilities become endless. Rubber ball a...
Brake/Clutch Reservoir U-Bolt Mount with Round Base Camera Adapter
A camera mount for the motorcycles, standard size double socket arm and round base with 0.25"-20 threaded stud.
Simply attach the ...
Camera Mount with Round Base and 1/4"-20 Male Thread
This mount consists of a 3" double socket arm, 2.5" diameter round base and 1" ball with a 1/4"-20 camera thread. The male thread matches most s...
Camera or Telescope Mount, Window Fixing.
A 1" x 1" window fixing clamp, a double socket arm and a camera mount round base make up this ingenious RAM mount suitable for fixing a movie, still, video...
Cessna Aircraft Seat Rail Base
The RAM-B-131B Cessna seat rail base is a rail that mounts to either a 0.25" or 0.50" NPT threaded pipe. Included are two rail connecting bolts that mount to the exit...
